Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Mirror Replacement




Power Mirror Replacement

Removal Procedure




1. Remove mirror glass.




2. Remove mirror trim panel by pulling out at top.
3. Remove foam filler.




4. Disconnect electrical connector from door harness.




5. Remove attaching nuts securing mirror.
6. Remove motor from mirror housing.
7. Unroute wire.

Installation Procedure




1. Route electrical connector.
2. Connect electrical connector.
3. Install foam filler.
4. Install motor.
5. Install three screws and tighten.

Tighten Motor to Mirror Housing Screws to: 3 Nm (27 lb-in)




6. Snap mirror glass assembly onto motor.




7. Install mirror attachment nuts.

Tighten Mirror Attachment Nut to: 10 Nm (89 lb-in)

8. Install foam filler.




9. Install mirror trim cover by placing lower portion of cover behind trim panel and push in on top fastener.