Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2002 >> L300 V6-3.0L VIN R >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Adjustments




1. Remove left side lower I/P closeout panel (hush panel) push pin fasteners and remove panel.
2. Remove left side lower heater duct assembly push pin fastener and remove duct.




3. Remove cruise brake switch by rotating it 180° so it will pull out from the bracket.

NOTE: The notch on the plunger will be fully visible when the plunger is all the way out.

4. Pull switch plunger all the way out (may require moderate force) to prepare for adjustment.
5. Install cruise brake switch into bracket and rotate 180° while holding brake pedal down during installation.
6. Adjust cruise brake switch by pulling brake pedal all the way up by hand. The switch internal rachet mechanism will lock switch in the adjusted position.
7. Install left side lower heater duct and push pin fastener.
8. Install left side lower TIP closeout panel (hush panel) and push pin fasteners.
pro multis · About Operation CHARM