Outside Rear View Mirror Glass

REMOVAL

CAUTION: TO MINIMIZE THE CHANCE OF PERSONAL INJURY, GLOVES AND SAFETY GLASSES SHOULD BE WORN WHILE REMOVING GLASS.




1. Install tape over glass portion of mirror to reduce chance of injury if glass breaks.
2. Grasp outboard edge of mirror with fingers.
3. Carefully pull rearward to view attaching tabs on glass assembly. If necessary, use screwdriver to disengage tabs on glass assembly. Housing is the same for manual and power.

INSTALLATION




1. Position new mirror glass assembly to housing.
2. Snap new mirror glass assembly onto housing.
3. Remove tape if previously applied.