Dimmer Switch: Service and Repair

DIMMER CONTROL/TRUNK RELEASE SWITCH

REMOVAL




1. Remove left side A/C vent fastener and partially remove vent.
2. Disconnect electrical connector from dimmer control/Trunk Release Switch.
3. Release retaining tabs and slide dimmer control/Trunk Release Switch out of A/V vent.

INSTALLATION




1. Slide dimmer control/Trunk Release Switch into A/C vent until retaining tabs engage.
2. Connect electrical connector to dimmer control/Trunk Release Switch.
3. Install A/C vent assembly and install fastener.

Torque:
A/C Outlet-to-I/P Fastener: 2.5 N.m (22 in-lbs)