Hood Shock / Support: Service and Repair

Hood Hold-Open Rod Replacement

Removal Procedure

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.




1. Open the hood and support with the appropriate auxiliary prop device.
2. Remove the screws from the prop rod bracket and remove the prop rod.

Installation Procedure





Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the prop rod bracket and screws.

Tighten the screws to 8 Nm (71 lb in).

2. Remove the auxiliary prop device.
3. Close the hood.