32. Forward Clutch Support, Low Roller Clutch Removal

FORWARD CLUTCH SUPPORT, LOW ROLLER CLUTCH REMOVAL

NOTICE: When prying the snap ring from the case make sure that the tool does not slip off the snap ring. If the tool slips, it could damage the race of the low roller clutch.

IMPORTANT: The snap ring opening must be facing toward transaxle oil pan area. If the snap ring opening is out of position, inspect transaxle case for damage.





1. Remove forward clutch support snap ring from transaxle case. Use Snap Ring Screwdriver J28585.

IMPORTANT: The parking pawl may need to be depressed in order to remove the forward clutch support.





2. Remove forward clutch support and low roller clutch assembly. Keep forward clutch support thrust bearing with forward clutch support assembly.