Front Side Door Window Replacement (Coupe)

Front Side Door Window Replacement (Coupe)

Removal Procedure




1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair
2. Remove the speaker.
3. Partially remove the water deflector to access the openings in the door structure.




4. Lower the window to access the window insulator (slide clip) retention tabs. If the regulator has failed in the full up position, lower the window and regulator as an assembly.




5. Disengage the front slide clip from the sash by depressing the retention tab and sliding the sash (1) forward. Repeat for rear window insulator (slide clip) (2).




6. When the window is disconnected, rotate and remove from the door.

Installation Procedure





Important: Before installing the door window, clear the window guide of any debris.


1. Install the door window into the door, aligning the sash with the window insulators (slide clips) and the window with the guides.
2. Slide the sash rearward onto the window insulators (slide clips).
3. Check the operation and alignment of the door window.




4. Install the speaker.
5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair
6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair