Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2002 >> SL2 L4-1.9L DOHC VIN 7 >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Service and Repair >> Vacuum Harness Assembly-2
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vacuum Harness Assembly-2

REMOVAL




1. Remove air intake tube and air box cover.
2. Remove accelerator control cable bracket attaching bolts.




3. Disconnect vacuum harness from EVAP canister purge solenoid.

IMPORTANT: Inspect the vacuum harness connectors for deterioration. Replace the vacuum harness if damaged.

4. Remove vacuum harness from throttle body by unclipping the two tangs and lifting it upward.

INSTALLATION




1. Install the throttle body vacuum harness connector.
2. Connect vacuum harness to EVAP canister purge solenoid.

IMPORTANT: See diagram to insure proper routing and connection of vacuum lines.

3. Install accelerator control cable bracket attaching screws.

Torque:
Accelerator Control Cable Bracket-to-Intake Manifold (LL0): 13 N.m (9.5 ft-lbs)

4. Install air intake tube and air box cover.
5. Start engine and check for vacuum leaks.
pro multis · About Operation CHARM