Transmission Temperature Sensor/Switch: Service and Repair

TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR
REMOVAL
1. Ensure ignition is Off.
2. Remove air induction system and air filter box from the battery tray and move aside to provide access to the sensor.





3. Disconnect transaxle fluid temperature sensor harness connector, use pliers to squeeze connector while removing.
4. Remove transaxle fluid temperature sensor.

INSTALLATION
1. Apply sealant with Teflon P/N 21485278 or equivalent on threads before installing.





2. Install transaxle fluid temperature sensor.
Torque:
Transaxle Fluid Temperature Sensor: 8 Nm (71 inch lbs.)
3. Connect transaxle fluid temperature sensor harness connector.
4. Install air box and install three air box bolts.
5. Install air induction system.
Torque:
Air Box Attachment Bolts: 10 Nm (89 inch lbs.)
6. Replace any fluid lost.