Front Door Window Glass: Service and Repair

Front Side Door Window Replacement

Removal Procedure




1. Remove the inner front door trim panel. Refer to Front Side Door Trim Panel Replacement (Early Production) (Front Side Door Trim Panel Replacement (Early Production)).
2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
3. Lower window to access window bolts.
4. Remove the window bolts.
5. Pull the window out of the window regulator guide plate.
6. Slide the window down and out of the primary glass run channels.
7. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure




1. Install the window by sliding the window into the door through the outside door belt opening.
2. Install the window into the primary glass run channels and rest the window on the regulator guide plate.

Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.

3. Install the window bolts.

Tighten the bolts to 10 Nm (89 lb in).

4. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
5. Install the front inner door trim panel. Refer to Front Side Door Trim Panel Replacement (Early Production) (Front Side Door Trim Panel Replacement (Early Production)).
6. Operate the window to inspect the operation.