Accessory Power Receptacle Replacement - Floor Console

ACCESSORY POWER RECEPTACLE REPLACEMENT - FLOOR CONSOLE

TOOLS REQUIRED
J 42059 Cigar Lighter Socket Remover

REMOVAL PROCEDURE
1. Remove the accessory power outlet fuse.




2. Remove the power port socket by placing one side of the "T" portion of the tool J 42059 into the tab window and then angle the other side into the opposite tab window, then pull the power outlet socket straight out.
3. Disconnect the power outlet electrical connector.

INSTALLATION PROCEDURE




1. Position the power outlet cover with the key to the slot into the power outlet hole.
2. Connect the power outlet electrical connector.
3. Align the power outlet socket to the console end panel and press into place until fully seated.
4. Install the accessory power outlet fuse.