Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2003 >> ION L4-2.2L VIN F >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair



IGNITION CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Remove the accelerator cable from the bracket.
3. Remove the accelerator cable bracket bolt.
4. Remove the accelerator cable bracket.




5. Disconnect the ignition control module (ICM) harness connector.
6. Remove the ICM retaining screws.
7. Remove the ICM from the ignition coil housing.

INSTALLATION PROCEDURE




1. Install the ignition control module in the ignition coil housing.

IMPORTANT: Make sure the interconnect and seal are lined up before module installation.

2. Install the ICM retaining screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the retaining screws to 1.5 N.m (13 lb in).

3. Connect the ICM harness connector.
4. Install the accelerator cable bracket.
5. Install the accelerator cable bracket bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the retaining screws to 10 N.m (18 lb in).

6. Install the accelerator cable to the bracket.
pro multis · About Operation CHARM