Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
55. Intermediate/4TH Servo Assemble and Installation
INTERMEDIATE/4TH SERVO ASSEMBLE AND INSTALLATION1. Install servo cushion springs and servo piston onto the servo pin.
2. Install snap ring onto servo pin in order to retain springs and piston.
3. Install new seals onto servo piston and servo cover.
4. Install servo piston assembly into servo cover. Lubricate piston seals with transaxle fluid in order to aid in assembly.
5. Install servo return spring into transaxle case.
6. Install servo cover and piston assembly over servo return spring.
NOTICE: Hand start and tighten servo cover bolts evenly to prevent damage to servo cover bore.
7. Install three servo cover bolts. Hand start bolts.
Torque:
Servo Cover Bolts: 12 Nm (9 ft. lbs.)