Removal and Replacement

Lock Cylinder Replacement - Lift Gate

Removal Procedure





1. Open the lift gate.
2. Remove the lift gate trim panel. Refer to Trim Panel Replacement - Lift Gate (Service and Repair) .
3. Using a pick type tool, depress the lift gate lock cylinder release button on the bottom side of the lift gate outside handle.




4. Remove the lift gate lock cylinder from the outside handle and disconnect the lock cylinder rod from the cylinder lever.



Installation Procedure





1. Install the lift gate lock cylinder gasket, if removed.
2. Connect the lock cylinder rod to the lock cylinder lever.
3. Install the lift gate lock cylinder to the outside handle.
4. Install the lift gate trim panel. Refer to Trim Panel Replacement - Lift Gate (Service and Repair) .
5. Close the lift gate.