Balance Shaft: Specifications

Torque Specifications
Balance Shaft Drive Sprockets 55 N.m (41 ft. lbs.)
Balance Shaft Retaining Bolts 10 N.m (89 inch lbs.)

Cylinder Block
Balance Shaft Bore in Block Front 42.000-42.016 mm (1.6535-1.6542 inches)
Balance Shaft Bore in Block Rear 0.763-40.776 mm (1.6048-1.6054 inches)

Balance Shafts
Balance Shaft Bearing Carrier Bore in Block I.D. 42.000-42.016 mm (1.6535-1.6542 inches)
Balance Shaft Bearing Carrier O.D. 41.975-41.995 mm (1.6526-1.6534 inches)
Balance Shaft Housing-to-Block Clearance 0.005-0.041 mm (0.0002-0.0016 inches)
Balance Shaft Bearing I.D. #1 20.050-20.063 mm (0.7894-0.7899 inches)
Balance Shaft Bearing I.D. #2 36.776-36.825 mm (1.4479- 1.4498 inches)
Balance Shaft Journal O.D. #1 20.000-20.020 mm (0.7874-0.7882 inches)
Balance Shaft Journal O.D. #2 36.723-36.743 mm (1.4458-1.4466 inches)
Balance Shaft Bearing Clearance #1 0.030-0.063 mm (0.0012-0.0025 inches)
Balance Shaft Bearing Clearance #2 0.033-0.102 mm (0.0013-0.0040 inches)
Balance Shaft End Play 0.100-0.300 mm (0.0020-0.0118 inches)
Balance Shaft Chain Length 368.622-369.032 mm (14.5127-14.5288 inches)
Balance of Shafts 4.05 Kg/mm per shaft, +/-6%