Activating Theft Deterrent
To arm the theft deterrent feature, perform the following:1. Turn the ignition On. Radio Off.
2. Press and hold preset buttons 5 and 6, at the same time, for five seconds. The radio display will show "- - - -"
3. Have the customer select a four digit code. (Suggest a number that is familiar to them.)
4. Enter the four digit code by using the
4.1 Press the down arrow side of
4.2 Press the up arrow side of
4.3 Press the down arrow side of
4.4 Press the up arrow side of
5. Push the AM/FM button. The display will show "REP" (repeat), requesting the four digit code be entered again to verify correct entry.
6. Again, enter the same four digit code by using the
6.1 Press the down arrow side of
6.2 Press the up arrow side of
6.3 Press the down arrow side of
6.4 Press the up arrow side of
7. Push the AM/FM button to store the code.
8. The display will show "SEC" indicating the radio is armed and the radio will return to normal operation.
If the radio displays "Err1", "Err2", or "LOCK", then the radio is already in the secure state and is armed with a different code other than the code that was entered. Proceed to the appropriate part of this Theft Deterrent section to deactivate the system if deactivation is desired.