Liftgate Emblem

LIFTGATE EMBLEM

REMOVAL

1. Using a heat gun, apply heat to liftgate emblem until emblem is warm to touch.
2. Gently pull liftgate emblem and adhesive away from liftgate.
3. Clean remaining residue from lifigate using an adhesive remover.

INSTALLATION




1. Make sure emblem mounting surface on liftgate is clean.




2. Refer to the correct illustration fur emblem locating dimensions.

IMPORTANT: The dimensions provided in the illustrations represent arc length measurements taken over the arc or curved shape of the liftgate.

3. Using the correct illustration as a guide, align emblem with liftgate.
4. Remove backing tape from emblem and position emblem on liftgate.
5. Apply moderate pressure to emblem.
6. Gently remove protective cover from emblem.