Windshield Side Reveal Molding Replacement

Windshield Side Reveal Molding Replacement

Removal Procedure

1. Remove the front roof panel applique. Refer to Panel Applique Replacement - Roof Front () in Exterior Trim.




2. Remove the side windshield molding from the windshield using a scraper to cut the adhesive from the windshield surface. This may take several passes to remove all of the adhesive.
3. Clean the old adhesive from the glass using isopropyl alcohol.



Installation Procedure





1. Remove the backing from the new molding adhesive tape.
2. Install the new side molding to windshield by pressing firmly into place.
3. Install the front roof panel applique. Refer to Panel Applique Replacement - Roof Front () in Exterior Trim.