Console Replacement

Console Replacement

Removal Procedure





1. Position the front seats rearward.
2. Reach under the front seats to access the lower console screws.
3. Remove the console screws.




4. Remove the cup holder liner.
5. Remove the cup holder screw.




6. Lift the rear of the center floor console.
7. Disconnect the electrical connector to the auxiliary power outlet.
8. Slide the center floor console rearward to access the upper console screws.




9. Remove the console screws.
10. Remove the upper console.



Installation Procedure





1. Position the console on top of the center floor console.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the console screws.

Tighten the screws to 2.5 N.m (22 lb in).





3. Connect the electrical connector to the auxiliary power outlet.
4. Reposition the center console.




5. Install the cup holder screw.

Tighten the screws to 2.5 N.m (22 lb in).

6. Install the cup holder liner.




7. Reach under the front seats to access the lower console screws.
8. Install the center console screws.

Tighten the screws to 2.5 N.m (22 lb in).

9. Position the front seat forward to the original position.