Seat Cushion Outer Trim Panel Replacement - Front Seat (2-Way)

Front Seat Cushion Outer Trim Panel Replacement (2-Way)

Removal Procedure






1. Remove the front seat. Refer to Front Seat Replacement - Bucket.
2. Remove the trim cover screws from the outer cover of the seat back recliner.
3. Remove the outer trim panel.






4. Remove the outer trim panel screws from the seat cushion.
5. Remove the trim panel.

Installation Procedure

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.






1. Install the trim panel and secure with the trim panel screws. Tighten the screws to 2.5 Nm (22 lb in).






2. Position the outboard recliner trim cover on the seat and secure with the trim cover screws. Tighten the screws to 2.5 Nm (22 lb in).
3. Install the front seat. Refer to Front Seat Replacement - Bucket.