Disabling the Frontal Inflators (Driver and Passenger)
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn ignition switch to the OFF position and remove key.
3. Remove AIRBAG mini-fuse from instrument panel fuse block (IPFB).
4. Locate passenger SIR connector attached to HVAC blower motor housing and detach clip from housing.
IMPORTANT: Do not remove upper trim panel. Passenger disconnect is accessible from underside of I/P.
5. Remove connector position assurance (CPA) device and disconnect yellow passenger SIR connector.
6. Remove CPA and disconnect yellow driver SIR connector, located near the base of the steering column on left side of steering column support bracket.