Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Oil Pressure Sensor: Description and Operation
Engine Oil Pressure Switch:
The Engine Oil Pressure (EOP) switch is located below the generator which is towards the bottom of the engine block near cylinder # 6. The EOP switch is a normally closed switch that opens when engine oil pressure exceeds 25+/-15 kPa (3.6+/-2.2 psi). The ECM supplies ignition voltage through a resistor to the EOP switch. With ignition On, engine Off, the ECM EOP switch input will be low (near 0 volts, switch closed). When the engine is started and oil pressure exceeds 25+/-15 kPa (3.6+/-2.2 psi), the switch opens and the ECM EOP switch input goes high (ignition voltage).