13. Forward Clutch Piston Travel Check

FORWARD CLUTCH PISTON TRAVEL CHECK





1. Install input shaft assembly onto rear case.
2. Install 8" Dial Indicator Extension Rod J45166 in forward clutch accumulator assembly bolt hole.
3. Assemble Dial Indicator Set J45200 (3) and 8" Dial Indicator Extension Rod J45166 (2) onto rear case and set dial indicator J45200.
4. Cover accumulator port (1) with a rag to control fluid when compressed air is applied to passage.

CAUTION: WHEN COMPRESSED AIR IS USED IN ORDER TO CLEAR FLUID PASSAGES AND TO DRY PARTS, ALWAYS AIM AIR PRESSURE AWAY FROM FACE AND EYES. ALWAYS WEAR ADEQUATE EYE PROTECTION IN ORDER TO AVOID INJURY FROM DIRT AND DEBRIS THAT MAY ADHERE TO PARTS.

5. Apply compressed air in order to measure forward clutch piston stroke.
6. If forward clutch piston stroke is not within specifications, select another backing plate.