14. Case Cover Assembly Disassemble

CASE COVER ASSEMBLY DISASSEMBLE





1. Remove 4-5 clutch apply bolts and 4-5 clutch apply retainers from case cover.





IMPORTANT: Be careful not to damage 4-5 clutch apply pipe or case cover.

2. Remove 4-5 clutch apply tube (609).





3. Remove thrust race from rear case.
4. Remove seal rings from rear case.





5. Remove torx bolts and forward clutch accumulator cover.
6. Remove following components from forward clutch accumulator cover:
^ Accumulator piston
^ Spring
^ O-ring
^ Seal ring