4. Manual Shaft Seal and Bearing

MANUAL SHAFT SEAL AND BEARING

^ TOOLS REQUIRED
- J 45161 Manual Shift Shaft Bearing Replacer

REMOVAL





1. Remove manual shift shaft seal by prying gently using a small pry bar.





2. Using Manual Shift Shaft Bearing Replacer J45161 and a ball peen hammer drive manual shaft bearing through case and remove.

INSTALLATION





1. Using Manual Shift Shaft Bearing Replacer J45161, and a ball peen hammer, install the manual shift shaft bearing into case.





2. Install manual shift shaft seal by pressing seal into case bore by hand.