Disassemble

FRONT CONTROL VALVE BODY

DISASSEMBLE

CAUTION: VALVE SPRINGS CAN BE TIGHTLY COMPRESSED. USE CARE WHEN REMOVING RETAINERS AND PLUGS. PERSONAL INJURY COULD RESULT.





1. Remove gasket (322).
2. Remove front control valve body spacer plate (321).
3. Remove gasket (320).





4. Remove ball check valve (355).
5. Remove fluid strainer (352).
6. Remove pressure relief valve spring (350).
7. Remove pressure relief valve (351).





8. Remove sleeve/bore retainer (349).
9. Remove solenoid modulator valve bore plug (348).
10. Remove forward clutch control valve (354).





11. Remove sleeve/bore retainer (349).
12. Remove solenoid modulator valve bore plug (348).
13. Remove neutral relay valve spring (357).
14. Remove neutral relay valve (356).





15. Remove sleeve/bore retainer (349).
16. Remove solenoid modulator valve bore plug (348).
17. Remove 2nd coast clutch control valve (359).
18. Remove 2nd coast clutch control valve spring (358).





19. Remove sleeve/bore retainer (349).
20. Remove solenoid modulator valve bore plug (348).
21. Remove solenoid modulator valve spring (347).
22. Remove solenoid modulator valve (346).