64. Transmission Case Cover Assembly Assemble

Transmission Case Cover Assembly Assemble





1. Apply automatic transmission fluid to the new forward clutch accumulator piston fluid seal ring (613).
2. Install the new forward clutch accumulator piston fluid seal ring (613) onto forward clutch accumulator piston (612).
3. Install the forward clutch accumulator piston spring (614) and the forward clutch accumulator piston (612) into the forward clutch accumulator cover(616).
4. Apply automatic transmission fluid to the new forward clutch accumulator cover seal (615).
5. Install the new forward clutch accumulator cover seal (615) onto forward clutch accumulator cover(616).
6. Install the forward clutch accumulator cover assembly onto the transmission case cover.

Notice: Refer to Fastener Notice in Service Precautions.

7. Install and tighten 1 of the 2 forward clutch accumulator cover bolts/screws (617).
^ Tighten the forward clutch accumulator cover bolt/screw (617) to 7.8 - 11.8 Nm (69.0 - 104.5 inch lbs.).





8. Apply automatic transmission fluid to the 3 new forward clutch housing fluid seal rings (607).
Install the 3 new forward clutch housing fluid seal rings (607) and the forward/direct clutch housing thrust bearing race (628) onto the transmission case cover.





9. Apply automatic transmission fluid to the 2 new 4-5 clutch apply pipe seals (608).
10. Install the 2 pipe seals (608) onto the 4-5 clutch apply pipe (609).





Important: Do not damage the pipe seals or the 4-5 clutch apply pipe.

11. Using a plastic hammer if needed, install the 4-5 clutch apply pipe (609) into the transmission case cover.





12. Install the 2, 4-5 clutch apply pipe retainers (610).
13. Install the 4, 4-5 clutch apply pipe bolts/screws (611).
^ Tighten the 4-5 clutch apply pipe bolts/screws to 5.9 - 7.4 Nm (52.21 - 65.50 inch lbs.).