67. Transmission Case Cover and 1-2 Reverse Clutch
Transmission Case Cover and 1-2 Reverse Clutch AssemblyInstallation
1. Remove any packing material and automatic transmission fluid from the contacting surfaces of the transmission case cover and the transmission case.
Important: Do not get any fluid on the contacting surfaces of the transmission case cover or the transmission case.
2. Apply formed in place gasket RTV to the transmission case cover.
3. Install the transmission case cover assembly (19) onto the transmission case assembly (17).
Important: Use LOCTITE(TM) 242 thread sealer on ALL bolt threads.
4. Install 9 - M8 x 1.25 x 30 mm bolts (1) and hand tighten.
5. Install 1 - M8 x 1.25 x 45 mm bolt (2) and hand tighten.
6. Install 2 - M8 x 1.25 x 48 mm bolts (3) and hand tighten.
Notice: Refer to Fastener Notice in Service Precautions.
7. Tighten the 12 transmission case cover assembly bolts in sequence.
^ Tighten the 12 transmission case cover assembly bolts to 19.6 - 29.4 Nm (14.5 - 21.68 ft. lbs.).