Seat Belt: Service and Repair
SEAT BELT REPLACEMENT - CENTER REARREMOVAL PROCEDURE
1. Remove the shoulder belt from the buckle.
2. Remove the seat cushion from the vehicle.
3. Remove the rear seat bolster.
4. Remove the upper fastener cover from the rear seat shoulder belt to expose the fastener.
5. Remove the fastener.
6. Remove the garnish trim.
7. Slide the shoulder belt out of the C-pillar trim panel slot.
8. Remove the trim finish panel from the rear window.
9. Slide the belt webbing through the slot in the trim finish panel.
10. Remove the retractor fastener and remove the retractor.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Position the rear seat shoulder belt retractor. Install the fastener to the retractor.
Tighten the fastener to 35 N.m (26 lb ft).
2. Slide the belt webbing through the slot in the rear window trim finish panel.
3. Install the panel.
4. Route the rear seat belt through the C-pillar trim panel slot.
5. Install the C-pillar trim panel.
6. Position the rear seat shoulder belt to the C-pillar. Install the fastener.
Tighten the fastener to 35 N.m (26 lb ft).
7. Install the upper fastener cover. to the shoulder belt
8. Install the rear seat bolster.
9. Install the rear seat cushion into the vehicle.
10. Install the center shoulder belt into the buckle.
11. Test the rear seat shoulder belt to ensure proper operation.