Side

Transmission Mount Bracket Replacement - Side

Removal Procedure
1. Remove the left transmission mount.





2. Disconnect the power steering lines from the side transmission mount bracket.





3. Remove the side transmission mount bracket to transmission bolts.
4. Remove the side transmission mount bracket from the transmission.

Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the side transmission mount bracket tot he transmission.
Tighten the transmission mount bracket bolts to 90 Nm (66 ft. lbs.).





2. Connect the power steering lines from the side transmission mount bracket. Tighten the power steering lines to mount bolt to 10 Nm (89 inch lbs.).
3. Install the left transmission mount.