Front

Transmission Mount Replacement - Front

Removal Procedure





1. Remove the engine cooling fan attachment bolts.
2. Raise the vehicle.
3. Position the engine cooling fan to allow access to the transaxle mount bolts.





4. Remove the front transaxle mount through bolt.





5. Remove the transaxle mount-to-transaxle attachment bolts.
6. Remove the transaxle mount from the vehicle.

Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the transaxle mount into the vehicle and tighten the bolts.
Tighten the transaxle mounts (front and rear)-to-transaxle bolts to 90 Nm (66 ft. lbs.).





2. Install the transaxle mount through bolt.
Tighten the transaxle mount (rear) through bolt to 55 Nm (41 ft. lbs.).
3. Reposition the cooling fan for installation.
4. Lower the vehicle from the hoist.





5. Install the engine cooling fan attachment bolts.
Tighten the engine cooling fan attachment bolts to 4 Nm (35 inch lbs.).