Console Replacement - Front Floor

Console Replacement - Front Floor

Removal Procedure





1. Position the front seats rearward.
2. Reach under the front seats to access the lower console screws.
3. Remove the console screws.




4. Remove the cup holder liner.
5. Remove the cup holder screw.




6. Lift the rear of the center floor console.
7. Disconnect the electrical connector to the auxiliary power outlet.
8. Remove the console from the vehicle.



Installation Procedure





1. Position the console between the front bucket seats.
2. Connect the electrical connector to the auxiliary power outlet.
3. Reposition the center console.





Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the cup holder screw.

Tighten the screws to 2.5 N.m (22 lb in).

5. Install the cup holder liner.




6. Reach under the front seats to access the lower console screws.
7. Install the center console screws.

Tighten the screws to 2.5 N.m (22 lb in).

8. Position the front seat forward to the original position.