Window Weatherstrip Run Channel Assembly Replacement - Front

Window Weatherstrip Run Channel Assembly Replacement - Front

Removal Procedure





1. Lower the front door window.
2. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .
3. Starting at one end, carefully pull the window weatherstrip run channel assembly from the door frame.



Installation Procedure





1. Install the window weatherstrip run channel assembly.

* Start at the lower rear corner of the window opening.
* Press the weatherstrip run channel onto the door flange.
* Check to make sure the channel is fully secured into the upper corners of the door frame.

2. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .