Overhead Console - Video Entertainment System (VES) Replacement

Overhead Console - VES Replacement

(SI Document ID# 1339664)

Removal Procedure





1. Flip down the display screen and remove the fasteners.





2. Pull down on the rear of the console to disengage the retaining clips.





3. Disconnect the electrical connections.





4. Remove the retaining tab from the slot and remove the console from the vehicle.

Installation Procedure





1. Install the console and slide the retaining tab into the slot.





2. Connect the electrical connectors.





3. Push up on the rear of the console to engage the retaining clips.

NOTE:
Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.





4. Install the fasteners and fold up the display screen.

Tighten

Tighten the fasteners to 2 N.m (18 lb in).