37. Variable Driven Pulley Bearing Replacement

Variable Driven Pulley Bearing Replacement

- Tools Required
- J 8092 Universal Driver Handle
- J 43077Variable Driven Pulley Bearing Installer
- J 45113 Variable Driven Pulley Bearing Remover
- J 45124 Removal Bridge





1. Install the J 45113 into the variable driven pulley bearing on the torque converter and differential housing assembly.
2. Using 2 wrenches, tighten the J 45113.





3. Using a wrench, the J 45124 and the J 45113, remove the variable driven pulley bearing assembly from the torque converter and differential housing assembly.






Important: Install the variable driven pulley bearing assembly with the rounded edge down.

4. Using the J 8092 (1), the J 43077 (2) and a hammer, install the variable driven pulley bearing assembly into the torque converter and differential housing assembly.