Radio Setup
RADIO SETUPComplete the following procedure, using a scan tool, in order to properly set up communication:
1. At the Main Menu screen, select: Diagnostics.
2. At the Vehicle Identification screen, select the following options:
- Model Year
- Saturn
- Model
3. At the System Selection Menu screen, select: Body.
4. At the Body screen, select: Radio.
5. At the Radio screen, select: Special Functions.
6. At the Special Functions screen, select: Radio Setup.
7. At the Radio Setup screen, press ENTER. The following test will set up a new or existing radio.
8. Verify that the scan tool displays "Test in Progress."
9. Verify that the scan tool displays "Test Completed Successfully."
10. Press EXIT on the scan tool and cycle the ignition.
IMPORTANT: The radio set up will configure the following systems:
- LEARN VIN
- Diagnostic Trouble Codes
- GMLAN Radio Messages
Without learning the following the setup procedure, the radio will display a calibrate message (CALIBRATE).