65. Timing Belt Drive Sprocket Installation

Timing Belt Drive Sprocket Installation





1. Install the key (123) and sprocket (237).





2. Install the guide (236).
3. Install the crankshaft position (CKP) sensor (704) and harness (701).

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the guide (703), nuts (702), and bolts (730).
^ Tighten the nuts and bolts to 9.8 Nm (87 inch lbs.).





5. Rotate the crankshaft to align the mark (2) on the sprocket (237) with the pointer (1) on the oil pump housing.