Ignition Coil(S) Replacement - Bank 1

IGNITION COIL(S) REPLACEMENT - BANK 1

REMOVAL PROCEDURE




1. Remove the air cleaner outlet duct assembly.
2. Disconnect the electrical connectors.
3. Remove the engine coil bolts.
4. Remove the engine coils.

INSTALLATION PROCEDURE




1. Install the engine coils.
2. Install the engine coil bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 12 N.m (106 lb in).

3. Connect the electrical connectors.
4. Install the air cleaner outlet duct assembly.