10. Transmission Case Housing Removal

Transmission Case Housing Removal

- Tools Required
- DT 46434 Mainshaft Socket
- DT 46435 Mainshaft Socket Handle





1. Rotate the transaxle assembly so that the torque converter housing is facing down toward the floor as shown.
2. Remove the 24 transmission housing mounting bolts (89, 90, 91, 92, 106, and 107).
3. Remove the transmission lift bracket (88) and the wiring harness bracket (108).






Notice: Do not nick, scratch or damage the sealing surface. The sealing surface is a machined surface. Damage to the machined surface can cause leakage.

4. Using the snap ring pliers, expand the output shaft transmission rear case retaining ring (513).,
5. Lift the transmission case housing (31) off of the torque converter housing (150).





6. Release the snap ring pliers and continue to remove the transmission case housing (31).
7. Remove the torque converter housing gasket (68).
8. Remove the 2 case locating pins (126).