118. Transaxle Fluid Level Indicator Installation

Transaxle Fluid Level Indicator Installation





1. Install a fluid fill level indicator tube O-ring seal (38) onto the transmission fluid level indicator tube (37).
2. Install the transmission fluid level indicator tube (37) into the transmission case housing (31).

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install a M6 x 1.0 x 14mm flanged bolt/screw (36), securing the transmission fluid level indicator tube (37) to the transmission case housing (31). Tighten the bolt/screw.
- Tighten the bolt/screw to 12 Nm (106 inch lbs.)
4. Install the fluid level indicator (35) into the fluid level indicator tube (37).