36. Manual Shift Shaft Bearing Replacement

Manual Shift Shaft Bearing Replacement

- Tools Required
- DT 46424 Adjustable Bearing Remover
- DT 46516 Driver
- EN 46342 Driver Handle
- SA9133TAxle Seal Puller
- SA9133T-1 Axle Seal Puller Adapter

Removal





1. Using the DT 46424 (3), SA9133T (1) and SA9133T-1 (2), remove the manual shift shaft bearing (66) from the transmission case housing (31).
2. Inspect the bearing for wear or damage Replace as needed

Installation





Using the 25 mm side of DT 46516 (2) and EN 46342 (1), install the manual shift shaft bearing (66) until it bottoms out flush in the transmission case housing (31).