74. 3RD Clutch Piston Clutch Plate Stack-Up

3rd Clutch Piston Clutch Plate Stack-Up





1. Install into the 3rd clutch housing (821) the 3rd clutch piston, belleville plate (817) as shown in the insert.





2. Install into the 3rd clutch housing (821) the following components:
- 3rd clutch steel plate (813)
- 3rd clutch fiber plate (812)
3. Alternately install the above components until a total of 5 each have been installed.





4. Install the 3rd clutch selective backing plate (811) with the flat side facing the last 3rd clutch fiber plate (812) as shown in the insert.





5. Using J28585, install the 3rd clutch backing plate 137 mm retaining ring (810) into the groove of the 3rd clutch housing (831).