Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Relay Replacement (Within an Electrical Center)
RELAY REPLACEMENT (WITHIN AN ELECTRICAL CENTER)
REMOVAL PROCEDURE
1. Remove the electrical center cover.
2. Locate the relay. Refer to Electrical Center Identification Views to locate the electrical center where the relay exists.
3. Remove the relay from the electrical center.
IMPORTANT:
- Always note the orientation of the relay.
- Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
INSTALLATION PROCEDURE
1. Install the relay in the same position as removed.
2. Install the electrical center cover.