Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2005 >> ION L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assembly, Disassemble, and Installation >> 66. Low and Reverse Servo Assemble and Installation
Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

66. Low and Reverse Servo Assemble and Installation



Low and Reverse Servo Assemble and Installation





1. Assemble the servo cushion springs (68) and the servo piston (69) onto the servo pin (67).
2. Install the snap ring onto the servo pin (67) in order to retain the servo cushion springs (68) and the servo piston (69).
3. Assemble the new seals (71, 72) onto the servo piston (69) and the servo cover (73).
4. Assemble the servo piston assembly (67-70) into the servo cover (73). Lubricate the piston seals with transmission fluid in order to aid in assembly.





5. Install the servo return spring (66) into the transmission case (51).
6. Install the servo cover and piston assembly over the servo return spring (66).

7. Notice: Hand tighten servo bolts to prevent bore damage.

Notice: Install the three servo cover bolts (25). Hand start the bolts.

Tighten the bolts to 12 Nm (9 ft. lbs.).
pro multis · About Operation CHARM