Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Transmission Mount Bracket Replacement - Rear
Transmission Mount Bracket Replacement - Rear
Removal Procedure
1. Remove the rear transaxle mount.
2. Remove the rear transaxle mount bracket to transaxle bolts.
3. Remove the rear transaxle mount bracket from the transaxle.
Installation Procedure
1. Install the rear transaxle mount to transaxle.
2. Notice: Refer to Fastener Notice in Service Precautions.
Using the following sequence, install the rear transaxle mount bracket bolts:
1. Tighten the middle bolt to 90 Nm (66 ft. lbs.).
2. Tighten the lower bolt to 90 Nm (60 ft. lbs.).
3. Tighten the upper bolt to 90 Nm (60 ft. lbs.).
3. Install the rear transaxle mount.