Harmonic Balancer - Crankshaft Pulley: Service and Repair

Crankshaft Balancer Replacement

Removal Procedure





1. Disconnect the negative battery cable.
2. Remove the air cleaner assembly.
3. Remove the accessory drive belt.

Important: Removal of the engine mount is not necessary because the drive belt does not have to be removed from the vehicle.

4. Remove the crankshaft balancer bolts.
5. Remove the crankshaft balancer from the crankshaft drive gear.

Installation Procedure





1. Install the crankshaft balancer onto the crankshaft drive gear.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the crankshaft balancer bolts.
^ Tighten the crankshaft balancer bolt to 20 Nm (15 ft. lbs.).
3. Install the accessory drive belt.
4. Install the air cleaner assembly.
5. Connect the negative battery cable.
^ Tighten the battery terminal bolts to 17 Nm (13 ft. lbs.).