Cylinder Head Assembly
Cylinder HeadCylinder Head Deck Surface Flatness - Transverse 0.030 mm (0.0012 inch)
Cylinder Head Deck Surface Flatness - Longitude 0.050 mm (0.002 inch)
Cylinder Head Deck Surface Flatness - Overall 0.08 mm (0.0031 inch)
Cylinder Head Bolt
Install NEW cylinder head bolts.
First Pass 30 Nm (22 ft. lbs.)
Final Pass 155 degrees
Camshaft Cap Bolt 10 Nm (89 inch lbs.)
Tighten the camshaft cap bolts in increments of 3 turns until they are seated.
Exhaust Manifold to Cylinder Head Nut 14 Nm (124 inch lbs.)
Exhaust Manifold to Cylinder Head Stud 10 Nm (89 inch lbs.)
Intake Manifold to Cylinder Head Bolt 10 Nm (89 inch lbs.)
Intake Manifold to Cylinder Head Nut 10 Nm (89 inch lbs.)
Intake Manifold to Cylinder Head Stud 6 Nm (53 inch lbs.)
Exhaust Camshaft Position Actuator
First Pass 30 Nm (22 ft. lbs.)
Final Pass 100 degrees
Intake Camshaft Position Actuator
First Pass 30 Nm (22 ft. lbs.)
Final Pass 100 degrees