Brakes and Traction Control: Specifications

Front Brakes
* Rotor Thickness - NEW 32.2 mm (1.27 inch)
* Rotor Discard Thickness* 30.7 mm (1.21 inch)
* Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
* Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
* Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
* Rotor Minimum Allowable Thickness After Refinish 31.08 mm (1.22 inch)

Rear Brakes
* Rotor Thickness - NEW 12.0 mm (0.472 inch)
* Rotor Discard Thickness* 10.5 mm (0.413 inch)
* Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 inch)
* Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
* Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
* Rotor Minimum Allowable Thickness After Refinish 10.8 mm (0.425 inch)

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.