Torque Converter: Service and Repair

Flywheel to Torque Converter Bolt Replacement

Tools Required
^ J 37096 Flywheel Holder
^ J 37623 10 1/2 inch Pinion Bearing Remover

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Remove the torque converter cover.





3. Use the J 37096 in order to rotate the flywheel and access the torque converter bolts.
4. Use the J 37096 to hold the flywheel.





5. Remove the flywheel to torque converter bolts.

Installation Procedure





1. Install the flywheel to torque converter bolts.

2. Notice:
Refer to Fastener Notice in Service Precautions.

Use the J 37623 to hold the flywheel.

Tighten the bolts to 63 Nm (47 ft. lbs.).





3. Install the torque converter cover.
4. Lower the vehicle.