Control Module HVAC: Testing and Inspection

HVAC CONTROL MODULE PROGRAMMING AND SETUP

Each of the following service procedures requires programming or setup procedures to be performed on the HVAC control module.

HVAC Control Module Replacement
If the HVAC control module is replaced, the following procedure must be performed:
Re-Calibrating Actuators-Refer to Re-Calibrating Actuators in HVAC Systems - Manual.

Actuator Replacement
If an actuator is replaced, the following procedure must be performed
Re-Calibrating Actuators-Refer to Re-Calibrating Actuators in HVAC Systems - Manual.